Tensile testing, also known as tension testing, is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area.From these measurements the following properties can also be determined: Young’s modulus, Poisson’s ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.
It is applicable in testing the Steel Product and so on , It can do the test of tensile,compression elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel ,etc .
Universal Tensile Servo hydraulic loading and motor driving system and a rugged six column construction for exceptional load frame rigidity .
Technical Parameter :
Load cell (KN) : 500,600, 1000,2000
Type : 6 Column
Measurement range : from 2%-100% of the load capacity .
Strength Precision : 1% of applied value
Cross head Speed : 0.1mm/min – 180mm/min Variable speed
The error of the distance : ≤1%
Resolution of the distance : 0.01mm
Valid Tensile Distance: 1000 mm
Compression Space : 500mm
Strength Resolution : 1/100000
Computerized Servo Hydraulic Tensile Strength Tester .
Reviews
There are no reviews yet.