Martindale Abrasion & Pilling Tester, is to determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters.
Standards:
GB/T4802.2, ISO5470, IWS TM112/196, DIN53863/53865, BS3424/5690, BS EN 388/530, JIS L1096, ASTM D4966/4970
Technical Parameters:
Work-station number : 4,6,8,9 Pcs
Counter display : Pre-set counter display:0-999999 Cumulative counter
display:0-999999
Motion speed : A:23.8rpm±2.5rpm B:47.5±2.5rpm C:71.3±2.5rpm
Abrading table diameter : φ120
Test pressure(abrasion test)
A: cloth specimen clamp:155g±1g
B: textile specimen hammer:395g±2g(equal to 9kpa)
C: furniture deck specimen hammer:594g±2g(equal to 12kpa)
Pressure test (pilling test)
A: cloth specimen clamp:155g±1g
B: textile specimen hammer:260g±1g
Weight of Load hammer: 2385g±10g
Weight : 168kg
Voltage supply:240V, 50HZ
External dimension: 820mm×605mm×365mm
Reviews
There are no reviews yet.